MasterCraft LASER DISTANCE FINDER/MEASURING TOOL Guide de l'utilisateur télécharger pdf (Page 6)

Model DT300 V1.0 11/09

Volume Calculation

The DT300 allows the user to compute room Volume.

1. Press the MEAS button to switch the meter ON. Wait several seconds and the Laser

pointer will automatically switch ON.

2. Press the button firmly twice (allow a second or so between presses).

3. A cube shape will appear with its Length side flashing indicating that a Length

measurement is to be taken.

4. Press MEAS to take the room Length measurement.

5. The cube’s Width side will now be flashing indicating that a Width measurement

is to be taken.

6. Press MEAS to switch the Laser pointer ON again.

7. Press MEAS again to take the room Width measurement.

8. The cube’s Height side will now be flashing indicating that a Height

measurement is to be taken.

9. Press MEAS to switch the Laser pointer ON again.

10. Press MEAS to take the room Height measurement.

11. Lines 1, 2, and 3 will now show the Length, Width, and Area (in ft

3 or

) respectively.

Note that the individual Height measurement is NOT displayed.

Indirect Measurements (Using Two Measurements)

The DT300 can measure the vertical height from Point 1 to Point 2 with the operator taking

the measurement from Point X. This is accomplished using two measurements.

1. Press the MEAS button to switch the meter ON.

2. Press the

button once. Wait several seconds and the Laser pointer will

automatically switch ON.

3. A right triangle shape will appear with its diagonal line flashing.

4. From exactly Point X, aim the instrument at Point 1 and press MEAS. One reading is

now complete and the bottom line of the right triangle will begin flashing.

5. From Point X, align the meter as horizontal as possible and aim for Point 2 and then

press MEAS. The laser pointer will switch ON.

6. Press MEAS again to take the second measurement.

7. The second measurement is now complete.The lower display line indicates the

vertical distance from Point 1 to Point 2.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

MasterCraft LASER DISTANCE FINDER/MEASURING TOOL Guide de l'utilisateur Page 6