MasterCraft X-15 Manuel d'installation télécharger pdf (Page 10)

10 Holland Marine Parts / MasterCra | Installaon manual and user guide

2: Drilling

- Drill the Central inlet with a Ø 105 mm drill

- Drill the 8x holes bolds for inlet studs. Use a Ø 13 mm drill

- Dry t the Water inlet Flange and verify it mates with the inside Angled Flange.

- Thoroughly Sand (Scotch brite) and clean/degrease the inside and outside of the hull in order

to prepare a perfect surface for the Sikaex 291i adhesive

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Pas de commentaire

MasterCraft X-15 Manuel d'installation Page 10